Learn how to Reverse Sear Ribeye Steak for the greatest steak you’ll ever have!
Reverse sear is an incredible way to cook a steak. Smoke at a low temperature for that unique wood smoke flavor, and then finish your steak hot and fast on your grill for the perfect crust at the perfect temperature every single time. Check out this guide as well, it can be applied to any meat.
There are so many ways to cook a steak. On the grill, the stovetop, in a stew, in the oven, to name a few. But have you tried something referred to as the reverse sear method? It’s a pretty popular thing right now, and for darn good reason.
What is Reverse Sear Cooking?
Let me explain. When you google “perfectly cooked steak,” what you will typically see is the more traditional restaurant method, which is where the meat is seared hot and then finished in the oven to finish cooking. But what I want to share is something that adds incredible flavor and allows you to finish with that beautiful crusted texture. The reverse sear. And better yet, the SMOKED reverse sear.
And here you thought you couldn’t achieve a perfectly cooked steak on a smoker?!
The idea is, instead of sear first then finish in the oven, you smoke it first at a low temperature to get the smoky flavor, and then finish it by searing (either on a grill or hot stovetop skillet) for the beautiful and flavorful crust. But first, let’s talk about…
The Best Cut for Reverse Sear: Ribeye Steaks
While the reverse sear works for any cut of meat, in this case I find it best with steak. And the thicker the cut of steak — like filet, ribeye steak, porterhouse, cowboy cut, or New York strip – the better. These thicker cuts can take on more smoke, which equates to more flavor without the meat cooking to finished temperature too soon, which could result in an overcooked steak.
For a ribeye look for at least 1 1/2 inches thick. Ask your butcher if they can cut it for you. We love Snake River Farms American Wagyu Ribeyes or their Double R Ranch Prime Ribeyes. Amazing flavor!
How To Season a Steak
Season simply with salt and pepper. That’s it. Nothing more is needed for a good cut of beef (OK, maybe a little granulated garlic too). And if you’re going to invest your money in a quality cut of meat (which is what we always recommend), why drown out those natural flavors with noise (aka too much seasoning). Good meat doesn’t need it. S&P is all you need.
You can use prime, wagyu, or something local. The key is to look for good marbling. We salted this cut on both sides lightly and then left in fridge for a quick dry brine over a couple of hours. The salt disappears as it is absorbed into the meat.
How to Reverse Sear A Ribeye
It all starts with smoking at a low temperature for flavor, and then finishing on high heat for that sear. This is a similar concept to sous vide cooking (which is also all the rage right now for good reason), only done on the smoker (no sous vide appliances necessary). This is also a similar method to these friggin’ amazing smoked burgers with chorizo and smoked poblanos. Those burgers were smoked at a low heat then finished on a hot grill for that irresistible sear.
What Temperature do you Reverse Sear Ribeye?
First we get the smoker preheated to 225 degrees (F). And you slowly bring the internal temperature of your meat up while smoking, until the internal temperature of the meat reaches 110 degrees (F). (Note we like our beef rare or cooked to 125 – 127, if you are more a medium rare, take the smoke internal temperature up to 120 degrees).
You’re not trying to cook the steak completely for this step, you’re just adding a layer of incredible flavor while slowly and steadily warming up the meat. Depending on the thickness of the cut this should take around an hour – but temperature is king here! Always cook to temp, not time. This is where it’s vital to have a good thermometer.
For something like this we use an instant read thermometer, like the Thermapen MK4 (pictured). You don’t want to mess around with something that’s going to take a long time to get a proper reading, not after you’ve already invested in a good cut of meat and not to mention the time it has taken you to cook.
Once your meat hits the 110 degree mark (or 120 for the end temp if you’re going for medium rare), that’s when you move the steak over direct heat and finish to get that sear mark. (We moved ours from the smoker to the Weber kettle grill that we have nice and hot while the meat was smoking. You can use whatever grill you have that can get hot hot hot.)
Alternatively, you can finish the steak on a hot cast iron pan if you don’t want to heat up a second grill (or if your smoker doesn’t get that hot). Just smoke the meat to 110, then transfer it to your hot cast iron pan over the stove top.
What temperature is Ribeye Done?
I like my steak rare to medium rare so I remove it at 125 – 130 degrees Fahrenheit at the center. So once the internal temperature reaches your desired doneness, let it sit for a few minutes for the juices to redistribute and tent it with foil. It’ll also keep cooking a little bit with that residual heat.
- Rare: 120-130 degrees F
- Medium Rare: 130-140 degrees F
- Medium: 140-150 degrees F
- Medium Well: 150-160 degrees F
- Well Done: 160 degrees F (and not recommended)
How To Reverse Sear On A Gas Grill
- On a three or more burner grill, turn on one burner to low or medium low heat.
- Place wood chips in a foil pouch on the grill grates over the flame.
- Place meat on indirect side. Close lid. Try to keep the temperature of the gas grill under 250 degrees, it’s tough as they have a lot of venting, so adjust your flame as needed. When the meat internal temperature reaches 110 degrees, you can remove the foil wood pouch.
- Next, crank up heat to high and finish with that sear. (Note: It is likely you will replace the foil pouch a few times.)
- Remove when internal temperature of meat is to your desired doneness.
Side Dishes for Steak Dinner
Reverse Sear Ribeye Steak Recipe
Reverse Sear Ribeye Steak
- Salt the steaks on both sides and place them on a cookie sheet in a refrigerator for up to two hours for the dry brine. Remove about 20 minutes before smoking and add pepper. (we’re not using an oil here due to the dry brine or salting)
- Preheat smoker to 225 degrees F (we like cherry wood), and remove the steak from the fridge.
- Apply the pepper on the steaks, and then place them on the smoker. They will take on that flavor and start to turn a reddish hue. When the internal temperature (IT) reaches 110 degrees (F), remove from the smoker and prepare for the grill. This takes roughly an hour.
- Prepare your cooker for direct heat targeting 500 degrees F over the direct heat. In this case we used a Weber kettle grill. You can also do this before the steak reaches 100 degrees (F). Or you can wait while you prep your sides.
- Place the steak over the direct heat for about 3 minutes. You're looking for a nice crust. The IT will come up fast on the steak, especially if you have just taken off the smoker. (some may want to re-season at this point, it's up to you. We don't. The dry brine or salt with the pepper was all we needed. Try it without re-seasoning first and then adjust. It's easier to add salt and flavor later rather than taking it away)
- Flip the steak for another 3 minutes until the IT reaches your desired doneness, we like 125 degrees (F) for rare. Let rest for 10 minutes with a loosely tented foil for the juices to reabsorb into the meat then cut and serve.
What if I only have a smoker, and no grill?
If you have a hard time getting your smoker to a sear temperature, have no fear. Just finish it on a cast iron pan over high heat. Get the cast iron pan hot, you know it’s hot enough when you add extra virgin olive oil to the pan and it is slightly bubbly and smoking just before you put the steak on. Sear each side for 2 -3 minutes or until the steak comes to the temperature you like.
More Reverse Sear resources
*This recipe was originally published in May 2016, and updated in May 2020 with some updated information. The recipe remains the same.
***While this post does contain affiliate links, it is not a sponsored post at all, nor were we paid by anybody to write this! We are just huge fans of these thermometers and have been using our own Thermapen for years. Whether a Thermapen or not, we truly believe a good thermometer is absolutely essential for grilling and smoking meat, especially using a method like reverse sear! Your perfectly cooked meat will thank you (and so will the friends you serve it to).
If you like this recipe we’d truly appreciate it if you would give this recipe a star review! And if you share any of your pics on Instagram use the hashtag #vindulge. We LOVE to see it when you cook our recipes.